LN Valve Test Cryo Storage Industries 1050kg 5 Cubic Deep Very Low Temperature Freezer ODM

Cryogenic Valve Liquid Nitrogen Cryogenic Test Cryogenic Valve Experimental Equipment

Product description

Steps

1 Place the parts evenly in the low-temperature cold box;

2 Connect the connecting pipe of the low-temperature liquid nitrogen storage tank or tank truck, pay attention to fixing, and prevent the filling liquid nitrogen from falling off or flying out and causing injury;

3 Use liquid nitrogen to immerse all the processed parts, if insufficient due to volatilization, liquid nitrogen must be supplemented;

4 According to the size and wall thickness of the parts, soak until the temperature of each part is stable, and use thermocouple measurement to ensure the uniformity of the temperature of each part of the part;

5 According to the relevant requirements of 3.1, the continuous heat preservation time meets the requirements;

6 After the parts are taken out with special tools and restored to the ambient temperature, they are repeatedly put into the liquid nitrogen cold box according to the requirements of 3.2.3-3.2.5, and the secondary treatment is performed again;

7 Take out the parts again with special tools and restore them to the ambient temperature; 3.2.8 After the low temperature treatment is over, follow-up processing can be carried out.

Advantage of Valve Low Temperature Equipment

1. It has extreme low temperature ,with the lowest temperature reaching -196℃,which can greatly meet the requirements of cryogenic treatment and cryogenic experiments for cryogenic valves and ultra-low temperature valves.

2. The latest intelligent temperature control system is adopted ,which can set required temperature parameters,cooling speed and heat preservation time according to process requirements ,and has process recording and remote monitoring functions.

3. The equipment adopts advanced liquid nitrogen dispersion technology and unique cold aircirculation system,make full use of liquid nitrogen function ,and completes the air tightness test of low-temperature valve in the process of uniform,stable and rapid cooling

Specification

Model	Inner cavity dimension (L*W*H)	External dimension (L*W*H)	Freezing capacity L/KG(hour)
SLX-433	400*350*350	1300*800*1050	50L/80KGS
SLX-544	500*400*400	1410*830*1080	80L/150KGS
SLX-655	600*500*500	1500*900*1130	150L/300KGS
SLX-755	700*500*500	1600*1030*1140	250L/500KGS
SLX-966	900*500*500	1850*1230*1210	324L/650KGS
SLX-1077	1000*700*700	1950*1280*1290	490L/1000KGS
SLX-1288	1200*800*800	2150*1330*1340	769L/1500KGS
SLX-1499	1400*900*900	2350*1580*1470	1000L/2000KGS

Why take cryogenic treatment of the workpiece?

* To improve the hardness and strength of workpiece

* To improve the abrasion resistance of workpiece
* To improve the impact toughness

* To improve the fatigue strength

* To improve the corrosion resistance of workpiece
* To improve the internal stress distribution of workpiece
* To ensure the dimension accuracy of workpiece

Our partners